Customer Rating:
Starting at
$14.99
In stock
CATS Calibration Targets are patented targets designed to allow the user to validate the tracking of their turrets and identify if the user is canting their rifle. Designed to be used at 100 yards, you’re able to collect valuable data to improve your accuracy without the need for extended ranges.
Both MOA and MRAD scopes can be testing on the same target.
Description
CATS Calibration Targets are patented targets designed to allow the user to validate the tracking of their turrets and identify if the user is canting their rifle. Designed to be used at 100 yards, you’re able to collect valuable data to improve your accuracy without the need for extended ranges.
Both MOA and MRAD scopes can be testing on the same target.
Learn to Use
The Horus Vision CATS Calibration Targets enable shooters to verify the tracking ability of their riflescope and also identify if they are canting their rifle while shooting.
The set up for the CATS Target is critical to achieve accurate results. It must be level front and back to the shooter, this should be verified with an actual level. The target is placed at 100 yards, however, it is more important that the horizontal stadia lines in the scope lineup with the lines on the target (i.e. 1 MRAD or MOA in your reticle matches 1 MRAD or MOA on the target). This ensures that the scope is lined up correctly to precisely measure MRAD or MOA.
While aiming at the white squares on the bottom line, the shooter fires a group, dials up while still aiming at the white square and fires another group, following this course of fire as desired or until the scope reaches 20 Mils or 66 MOA of adjustment. The shooter can then check the target and see where the bullet impacts are and how they align with the scope adjustments. The bullet impacts will also be shifted left or right if the rifle has been canted.
The same target can be used with both MRAD and MOA scopes, and it measures 38” x 79” so will require a large backing for mounting.
If you are worried about the elevation adjustments in your scope and need a way to verify them, the CATS is a great tool to have.
Technical Specs
| Description | Specification |
|---|---|
| MRAD Elevation | 20 MRAD |
| MOA Elevation | 66 MOA |
| Height | 79 Inches |
| Width | 38 Inches |
Reviews
There are no reviews yet.